ÖÐ ÎÄ
Product List
Mass Finishing
Sand Blasting Machines
Sand Blasting Media
Abrasives
Centrifugal Casting Machines
Machines for Locks and Keys Industry
Others
  Grinding Glass Beads
  Reflective Glass Beads
  Micro-grinding & dispersion ceramic beads
  Ceramic Evaporator Boats
Home
Micron-grinding & Micro-dispersion ceramic Beads

Sintered aluminum oxide beads or zirconia beads widely used as wet and dry grinding media adpoted by micron powders processing, not only used in paint, dyement,and ink industries, but also used in magnetic, pharmaceutical, papermaking, China-clay and rubber industries.
Micron-grinding & Micro-dispersion ceramic Beads
are widely used to grinding or dispersion of ink, paint, pigment,dye, pharmaceutical, titanium dioxide,Calcium carbonate, zircona sand, silica powder, kaolin, magnetic power, etc

 
ceramic beads
 
Alumina ceramic Micro-beads
 
Typical properties
Size, mm
Item ACB ACB-I ACB-II ACB-III
Chemical content Al2O3+SiO2 Al2O3+SiO2 Al2O3+SiO2 Al2O3
0.5-0.8

0.8-1.0

1.0-1.2

1.2-1.5

1.5-2.0

2.0-2.5


Specify gravity 2.7 3.2 3.2 3.6
Bulk density, g/cm3 1.75 2.0 2.0 2.6
Hardness, HRC 110-120 115-122 118-122 118-124
Whiteness, (457), min 93 93 - -
Wearing rate,%, ( in 4000rpm grinding miller) 0.0032 (beads in dia 3-4mm,) 0.0030 (beads in dia 3-4mm,) 0.0032 (beads in dia 3-4mm,) 0.0030 (beads in dia 3-4mm,)
Application Ultra-fine grinding  of ultra-fine heavy Calcium carbonate, Kaolin, Talc etc Grinding or dispersion of Calcium carbonate,, Kaolin, pigment, dye, graphite, paint, bauxite. Grinding or dispersion of Ultra-fine heavy Calcium carbonate, Ultra-fine Kaolin, zircon sand, pigment, dye, graphite, paint. Grinding or dispersion of bauxite, zircon sand, silica powder, magnetic material,etc.
Zirconia Cearmic Micro-Beads Size, mm
 
Typical properties
Item ZrCB-I ZrCB-II ZrCB-III ZrCB-IV
Chemical content ZrO2+Al2O3 ZrO2+Al2O3 Al2O3+SiO2 ZrO2 + Al2O3+SiO2
0.5-0.8

0.8-1.0

1.0-1.2

1.2-1.5

1.5-2.0

2.0-2.5


Specify gravity 3.2 3.6 4.0 4.2
Bulk density, g/cm3 2.0 2.3 2.4 2.85
Hardness, HRC 118-124 118-124 118-124 118-124
Wearing rate,% per hour, ( in 4000rpm grinding miller) 0.0032 (beads in dia 3-4mm,) 0.0030 (beads in dia 2-3mm,) 0.0028 (beads in dia 2-2.5mm,) 0.0028 (beads in dia 2-3mm,)
Application Grinding or dispersion of ink, paint, pigment, pharmaceutical,
titanium dioxide, heavy Calcium carbonate, kaolin, magnetic power, etc
Grinding or dispersion of ultra-fine zirconia silicate,ultra-fine heavy Calcium carbonate, ,titanium dioxide, magnetic power, etc Grinding or dispersion of alumina powder, zircon sand, silica micropowder, magnetic material, etc Grinding or dispersion of bauxite, zircon sand, silica powder, magnetic material,etc.
Tel/Fax: + 86 755 83660116, info@kaiteindustry.cn, szkaite@hotmail.com
Copyright Kaitexin All rights reserved.